Friday, November 7, 2008

The Ten Cannots

The following is often inappropriately attributed to Abraham Lincoln per a leaflet misprint in 1942. Several versions can be found on-line, but the original was penned by William J. H. Boetcker in 1916...

You cannot bring about prosperity by discouraging thrift.
You cannot strengthen the weak by weakening the strong.
You cannot help little men by tearing down big men.
You cannot lift the wage earner by pulling down the wage payer.
You cannot help the poor by destroying the rich.
You cannot establish sound security on borrowed money.
You cannot further the brotherhood of man by inciting class hatred.
You cannot keep out of trouble by spending more than you earn.
You cannot build character and courage by destroying men's initiative and independence.
And you cannot help men permanently by doing for them what they can and should do for themselves.
- William J. H. Boetcker

I would like to add one more...

You cannot imagine how great it feels to have another person like something you've created enough to actually PAY you for it!

I get that same feeling of bewilderment and joy blended into one every time someone buys a piece I've made. I guess my critical eye sees faults they don't and wonders why someone would buy such drivel. I hope that feeling (the one of bewilderment and joy, not of drivel) never gets old!

The last time I felt that way was... when was that again? Oh, it was yesterday afternoon! Megan Fitzpatrick had e-mailed me to let me know one of the articles I'd submitted to Popular Woodworking for their Out Of The Woodwork contest was picked as a runner up! They want to pay me for the first publish rights to it! So now someone wants to pay me for the words I've written! More importantly, I think, is that I can now say I've been published. :)

That totally made my year!

Monday, September 15, 2008

Making My Own Tools - The Street Sweeper Tine

Quite a few months ago, while crossing a parking lot, a glint of metal caught my eye. I picked it up and gave it a quick examination. It was about 1/8" wide, around 1/16" to 1/32" thick, and a little more than 5" long. One end of it was square, like it had been broken off after repeated flexing back and forth. The other end was rounded, like a single-edge knife blade.

I stared at it for 10 seconds or so before I realized what it was - a tine from a street sweeper brush.

I wondered if I might be able to put it to good use, so I stuck it in my backpack and continued on my way. Ever since then, I'll glance down every now and again when I'm walking through a parking lot to see if I can spot any more. As of now, I have a collection of about seven or eight tines of various lengths - most of them are six inches long or longer.

I don't know if the metal will hold an edge. It feels a lot like spring steel, which makes me think it might. So one of the first things I need to do is take a diamond stone to one of them and see what kind of edge I can put on it. If that works, then maybe I'd be able to put them in a handle and create some small chisel-like tools for cleaning out detailed areas of carvings or removing bits from string inlay channels.

If they're thin enough, maybe I could figure out some way to sharpen up the shortest edge and use it to help with running string inlays by holding it in a scratch stock.

If they don't hold an edge, I wonder if I might be able to use them in some sort of leather work. I'd like to some day try my hand at making a sporran - maybe I could use the tines as ribs or "stays" like they have in shirt collars, like for the sporran flap. Or in some other part of the construction where it would be useful to maintain the shape.

I like the idea of trying to take something like that and putting it to good use. Maybe you can think of something I haven't? If so, let me know. I'd be interested in your thoughts.

Thursday, September 11, 2008

The Changing Of The Guard...

Yesterday evening I attended the monthly planning meeting for the Saint Louis Woodworking Guild. It was a momentous occasion, to say the least! The gentleman who has written our newsletter for the past 17 years has decided to hang up his pen, so to speak. He's tired of writing newsletters; he wants to spend more time in the shop and less time in front of the computer. Incidentally, this coincides with our website administrator's desire to hand off the website maintenance to someone else!

Of course, this didn't all just come up that evening. It is something I've known about for a few months now. It is something our new guild president (a friend of mine, Scott), the new guild secretary (a friend of the president, Matt), another guild member who does website design (Michael), and I have been waiting for.

Not to take anything away from the hard work these two gentlemen have done over the years, but both the newsletter and the website are a bit stale at the moment. The newsletter is written in the format of:
- Brief introduction of what is going on at the next meeting
- Long, detailed (almost verbatim) description of the main presentation at the previous meeting
- A letter from the President
- Very wordy "Library" section on one or two books (just short of being a book itself, honestly)
- Brief overview of miscellaneous things that happened after or before the last presentation (show-and-tell, announcements, items for sale or wanted to buy)

The website was designed years ago with some off-the-shelf web development software that isn't very user-friendly and is a bit behind the times. It's difficult to navigate and it looks, well, "old". It has had a lot of Band-aids applied to it, and they're starting to peel off.

The meeting took place in the back room of a restaurant/bar. I was just a few minutes late, so most everyone else was seated when I arrived. Upon entering the room, I looked at Scott and Michael and Matt and smiled. I could smell it in the air; the time was ripe for change!

The first 20 minutes of the meeting were spent skirting the main topics, but soon we were discussing newsletter and website ideas in fury and earnest.

We talked about things like:
- reducing our mailing costs by sending a link to a .pdf via e-mail
- reformatting the newsletter to increase readability, add relevant material, and cut verbose sections down to a manageable size
- reformatting the website for easier navigation
- add individual member sections where they can update profiles and contact info, pay for their membership fees, and add project images
- how to deal with delinquent members and membership expiration

I was surprised by several things; one is that so many of the board members were excited about the changes and ideas we brought up, but another is how opposed to change one or two of the board members were. One even said we could create the newsletter in .pdf, but he still wanted it mailed to everyone and he wanted it to look exactly like the old newsletters.

Wow - that's progressive.

(I was glad to see everyone else quickly shoot down that idea.)

In the end, it was a really good meeting. The worst part about it was the terrible service from our waiter. He was more intent on taking his smoke breaks than doing things like bringing us our drinks or the bill.

I've started brainstorming for newsletter ideas, from new sections I think might be fun or informative to ways we can keep the content exciting and new. Some of them are existing sections I think we can keep, but most of them are new. Here they are:
- Featured Member
- Letter from the Editor
- Letter from the President
- Events Calendar
- Next Month's Topic
- One or Two Articles that Compliment Next Month's Topic
- Classifieds Section
- Library Corner
- Adventures in Woodworking (this is an idea I got from some old issues of FWW - they stopped doing this section at some point in 1985 or so)
- Ask the Woodnut (Michael thought it would be funny to have a Dear Abby section where members could e-mail in questions or if I didn't have any worth answering I could make something up that reads high on the goofy crap-o-meter.)
- Woodcraft Classes (A sponsorship opportunity? This might answer one of the concerns about the rising costs of producing a newsletter. Our meetings take place in the local Woodcraft store, just 10 short minutes from my house I might add, so maybe I could talk to the owner of the store and see about publishing the class list in every issue for a small fee.)
- Other Learning Opportunities (local colleges offering classes, community centers, woodworking schools, weekend seminars, etc.)

If anyone out there is a member of a woodworking guild and you have any ideas to offer me, I'd love to hear from you!

A Tale Of Two Chisels...


A few weeks ago I was trolling eBay, looking for some carving chisels. I came across a listing that was simply marked, "two chisels" with a starting price of about $9. I did a double-take and quickly saw they were not chisels but turnscrews! And they looked to be just about the sizes I was looking for!

I've wanted to get a few turnscrews for some time now, but I've never wanted to spend the money on a full set of five or six - I just don't think I use enough screws in my woodworking to necessitate having all of those sizes. Any time I've seen them on eBay, they are either in the full set (and end up going for a whole lot of money) or they are individuals (with a starting bid of $20 or more).

I think the listing gave the wooden handles as "oak", but... given that they didn't know the difference between a chisel and a turnscrew, I didn't put much faith in their ability to identify the wood used. So here's a close-up of the handle...

What do you think? I've seen enough planes and tools in my day to see the similarities between these handles and the flecked rays of beech, so that would be my guess.

The ball of the handle of each turnscrew is slightly oval in shape, not really round. It fits well in the palm of my hand and seems to give me good control.

Both handles are marked with the word "TOGA" and the letter "E". I'm pretty certain Toga was a company in England that made turnscrews and chisels and braces (probably made a lot more than that, but those are the only things I've ever seen for sale with that name marked on them).

The tips of both turnscrews are a bit worn, so I might need to spend a little time fettling them just a bit to get them in shape. Fortunately for me, I came across an article on fettling screwdrivers in one of my recently acquired Fine Woodworking Magazines! I'll try to document the process when I get it started.

Saturday, August 30, 2008

When I was nine...

This morning, my wife and I began our Labor Day weekend by running over to an estate sale just a few minutes away from our house. The posted description wasn't terribly promising, but there are so few this close to us that we had to swing by and see what we could find.

With a "More Out Back" sign by the front door, the first place we headed was the tool shed in the back yard. Unfortunately, the only tool I could find after five minutes of looking was a cheap and bent-bladed keyhole saw. I don't cut that many key holes myself, so I left it there as we made our way to the house.

Inside the house, we could tell my wife's pickings were going to be slim. Pretty easy to tell if you're going to find things like cut glass or coin glass when you walk in the front door. My pickings aren't always so easily found, though. Tools have a way of showing up in the weirdest places, so I'm always sure to search the house bottom to top (you ALWAYS start in the basement when looking for tools at an estate sale...).

One foot on the last step and the other on the basement floor, I looked up and my heart jumped a bit. In front of me was an old workbench with a planing crotch screwed to the top left side and an old leather belt screwed to the apron, making loops to hold chisels at the ready. Obviously whoever lived here actually did some woodworking and the chance of finding some good tools jumped 55%!

But aside from a few jars of screws and nails and one old mostly-working German clamp, there wasn't a tool in sight. What a disappointment! I asked one of the women in charge and found out that the sale started Friday morning and we had arrived just an hour before the sale was to be over! (What kind of schmuck starts an estate sale on a Friday morning??)

My chance of finding anything good just dropped to a low, low 5%. But I'm not one to give up so easily, so I headed upstairs to see what I could find.

And this time my persistence paid off. In the last room I checked, under a small table in a corner, slightly covered by a towel that had fallen to the ground, were two of those cardboard magazine holders that allow you to store about 15 or so magazines in an upright position.

I turned my head to the side so I could more easily read the spines... the first one I saw said, "Fine Woodworking". I don't think I read it on four other magazines before I reached for both boxes to pull them out from under the table.

I held my breath as I counted them up... there were thirty-three issues in all, from as early as #33 (May/June '82 - I was nine years old that month) to as late as #123 (April '97). Quite a few of them were from 1985 or older, and I knew these would help fill some rather large spots in my FWM collection. There wasn't a price on them, but I hefted a box in each arm and headed downstairs regardless.

At the checkout table, the woman asked me how many magazines I had. "Oh, man," I thought, "She's going to charge me a couple dollars for each one and my wife is never going to let me drop $66 on a bunch of old magazines!" But I took a deep breath and mumbled, "33" as quietly as I could. Then my wife dropped a few things on the table as well, and the woman pulled out a calculator to punch up some numbers.

The grand total: $5.60

That's right, folks - I picked up these wonderful tombs of almost-lost knowledge for just $.10 a piece, $3.30 in all! I dropped the exact amount on the table and ran out the door before she realized her obvious calculation error.

This evening I spent some time thumbing through the first couple of issues. There is some amazing information in these old magazines, like articles on woodlot management, shoji screen construction, making fly rods from split bamboo, and photographing your work. I even found a detailed explanation on how to make inlaid wooden cabinet hinges! There are interviews with James Krenov and Art Carpenter, written when these fantastic woodworkers were at their prime!

There are a few articles and pictures that made me laugh out loud, like Ian Kirby, demonstrating proper planing techniques in tight-rolled jeans (can you imagine woodworking in pegged jeans???) and ads for *brand new* power tools like the Excalibur scroll saw.

It looks like there used to be a reader-written section called, "Adventures in Woodworking". Not sure when it was phased out, but the stories were great fun to read. I'd love to see something like that come back in the current iteration of the magazine. Maybe I'll write them a letter...

And then I saw things that made me a little sad. In the July/August issue of '82 is a photo of Prince Charles, holding a split and shaved child's chair, with a caption saying who made it for him and how it would be necessary pretty soon as Princess Di was expected to give birth any day. I found an ad for top quality, extra durable, one-piece Lignum Vitae carver's mallets for $6.90 that brought tears to my eyes. In 1983, you could get a brand new #52D Record vice for under $100 delivered.

(I had to run to the bathroom for a tissue when I read that one.)

Want to know when they started printing the magazine information on the spine? It was November/December '82 (Issue #37).

I can tell you when Fine Woodworking switched from the larger 12"x9" size to the now-standard 10.5"x9" size. (April '96, Issue #117)

Ever wonder when they first printed an issue with a cover in full-color? (September/October '84, Issue #47)

Would you like to know how John Lively makes his marking gauges? I'd love to know, too. Unfortunately, that article was in Issue #32 and this treasure trove starts at issue #33. :(

(Oh, well, you can't win them all...)

The moral of this blog entry, my friendly woodworking boys and girls, should be obvious. Don't stop looking until the last corner has been searched! You never know what you might find!

Now, if you'll excuse me... I have some reading to catch up on.

Thursday, August 28, 2008

Do you take me entirely for a Windsor?


A few years ago, I stumbled across a website by a guy who lives near Kansas City, Missouri. I don't remember exactly how I found it - I believe I was searching for a beading tool or an inlay tool, probably something along the lines of a Preston router.

Anyway, whatever I was searching for, I found Kevin Brennan, owner of the Kansas City Windsor Tool Works, instead! And Kevin happens to make copies of a wonderful old tool called a Windsor Beader (also known as a Poole and Williams Beader). I contacted him to find out pricing and availability, but he replied that his first batch of the beader had already sold out.

I told him to let me know if he was to ever run another batch and then I guess I forgot about it...

Two years later, some time around January or February of this year, I got an e-mail from him. He said he was gearing up for another production run and that I should let him know if I wanted to pre-order a beader! That was about the time I'd started thinking about what I might want by way of a birthday present, so I discussed it with the wife and she agreed to let me place the order.

Originally, the batch was supposed to be ready some time around the beginning of June, just a month after my birthday, but some slight hiccups in the production process (part manufacturing, I believe) forced Kevin to push some of his deadlines back a bit. So it didn't actually arrive until last week.

And tonight I finally had time to pull it out and take some pictures of it for you. I wanted to actually put a cutter in and cut a bead, but he recommends sharpening the cutters before you even put them in the first time to remove little bits of slag that might remain on the edge from the cutting process. That slag could scratch the wonderful polished bronze... and I'd rather give it a few weeks of pristine appearance before I bugger it all up. But sharpening the cutters involves polishing the flats and then honing the edges with slip stones and I just haven't had the time to get that done. So for now, you're just getting pictures of the tool.

After a day of pawing at it and messing around with the different fences, I put it away. When I pulled it out again the next morning, I noticed I'd left finger prints all over it! That wouldn't do. On Sunday, my wife and I were shopping and we walked past a jewelry store. I went inside and asked them if they had any polishing cloths available for sale. As it turns out, the store was having a grand opening that day, so they gave me a cloth for free. Score! Now my bronze is all nice and shiny again.

This evening I found a great article Kevin had written for one of my favourite on-line woodworking magazines - WK Fine Tools. In the article, he goes over the steps to shaping one of the edges of the blank cutter (in the center of the picture to the right) that comes with the beader. I'll have to be sure and print that out tomorrow when I have access to a printer and stick that in with my paperwork for the tool. I picked up an additional blank cutter (not photographed), just in case. You could also use part of an old saw blade for blank cutters, but... it was just easier to have Kevin throw another blank into the box.

Eh, it might be a few months late, but... Happy Birthday, Ethan!

Wednesday, August 13, 2008

Oh, For Pete's Sake...

I'm stealing my newphew's new "catch phrase" for this blog title. Funny to hear it coming from a seven-year-old; it makes him sound much older than he really is. He said it a few times last weekend when I stomped him on the wii (Olympic Games, appropriately enough). I could have let him win the hammer throw, but a) I honestly have no control over how good I do and could just as easily have faulted on the throw as launched it the 84 yards I did and b) I don't think that would have done him any good.

Today I'm using it because I just happened to notice the date on my last blog entry.

I can't believe I've gone this long without making an entry! I feel terrible about it (no, I really do!). I'm pretty sure it has everything to do with the number of woodworking projects I've completed in the last three months - approximately zero. So I guess the answer to my blogging problem is to get back in the shop and make something!

I could do a blog entry on my latest house project, but it really had nothing to do with wood. And I don't imagine you would want to see step-by-step photos of me pulling the toilet in the hall bathroom to replace the wax ring, gasket, and mounting bolts and then reassembling it.

I do have some woodworking project ideas sitting on the back burner, and I really want to get started on them, so maybe I'll have something worth photographing and posting here in the near future.

If you'll take note at the bottom of my homepage, I've now added a playlist for the album "Currently Playing in the Shop". Nothing like a bit of Wake the Dead to motivate me into some creative woodworking!

(Good news, by the way... no leaks on the toilet fix!)